TRIO-PS/1AC/24DC/ 2.5 – Phoenix Power supply unit

Bộ nguồn điện TRIO-PS/1AC/24DC/ 2.5 chuyển đổi chính cho việc lắp đặt trên thanh DIN, đầu vào: 1 pha, đầu ra: 24 V DC/2.5 A.

Thông số kỹ thuật INPUT

Nominal input voltage range	100 V AC … 240 V AC
Input voltage range	85 V AC … 264 V AC (Derating < 90 V AC: 2,5 %/V)
Derating	< 90 V AC (2.5 %/V)
Input voltage range AC	85 V AC … 264 V AC (Derating < 90 V AC: 2,5 %/V)
Electric strength, max.	300 V AC
Voltage type of supply voltage	AC
Inrush current	< 15 A
Inrush current integral (I²t)	0.5 A²s
AC frequency range	45 Hz … 65 Hz
Mains buffering time	> 20 ms (120 V AC)
> 100 ms (230 V AC)
Current consumption	0.95 A (120 V AC)
0.5 A (230 V AC)
Nominal power consumption	97 VA
Protective circuit	Transient surge protection; Varistor
Power factor (cos phi)	0.72
Typical response time	< 1 s
Input fuse	2 A (slow-blow, internal)
Permissible backup fuse	B6 B10 B16
Recommended breaker for input protection	6 A … 16 A (Characteristics B, C, D, K)
Discharge current to PE	< 3.5 mA

Efficiency	86 % (for 230 V AC and nominal values)
Output characteristic	U/I
Nominal output voltage	24 V DC ±1 %
Setting range of the output voltage (U_Set)	22.5 V DC … 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (I_N)	2.5 A (U_OUT = 24 V DC)
Derating	55 °C … 70 °C (2.5%/K)
Feedback voltage resistance	35 V DC
Protection against overvoltage at the output (OVP)	< 35 V DC
Max. capacitive load	unlimited
Active current limitation	Approx. 5 A (for short-circuit)
Control deviation	< 1 % (change in load, static 10 % … 90 %)
< 2 % (change in load, dynamic 10 % … 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple	< 30 mV_PP
Output power	60 W
Peak switching voltages nominal load	< 20 mV_PP
Maximum no-load power dissipation	0.8 W
Power loss nominal load max.	10 W
Rise time	< 2 ms (U_OUT (10 % … 90 %))
Connection in parallel	yes, for redundancy and increased capacity
Connection in series	yes